3 Best Candidates for the Best Laminate Floor Cutter

If you are thinking about having a reliable and solid laminate floor cutter that can do the job properly and correctly, then you should know that there are many of them out there.

It’s a good thing that there are some reliable brands that are known for their quality and performance.

And these cutters have been grouped into their own specifications so buyers can have easier consideration leading to easier purchase.

The Best Selling Cutter – EAB Tool 2100005 Exchange-a-Blade

The reason why this laminate floor cutter is considered the best selling because of the many included handy features.

For a starter, cutting laminate floors is easy and accurate. It is able to accommodate ½ inches or 12mm of thickness. It is also flexible, supporting various materials such as fiber cement or vinyl.

Here are other things to like about this cutter:

• It is constructed from steel and aluminum combination. You can expect lightweight use that won’t compromise the strength and solidity
• The blade is made from high carbon steel, and it is longer lasting than stainless steel. Not only that, you can sharpen it so it will remain sharp
• If you know how to sharpen the blade, you won’t need a replacement blade. But if you don’t have the knowledge, spending money for the quality (replacement) blade won’t cost you a fortune.
• It is perfect to deal with rubber, foam, vinyl tiles, laminate, linoleum, and LVT. You can also use it to cut fiber cement, engineered wood, and solid wood although the performance would be more limited.
• It can deal with materials up to 9 inches of width, covering most siding and plank-style floor
• It comes with adjustable guide swings or protractor that can set from 0 degrees to 45 degrees

However, this cutter isn’t perfect. There are several disadvantages to expect when using it. They are:

• It doesn’t really do well with cheap laminate floors. They mostly have edge chip. You can try cutting it with upside down manner to reduce the issue
• If the blade is dull and you have to cut too hard or too thick material will lead to housing or handle crack because the lever will have too much force
• It can only be used for perpendicular cuts. If you want lengthwise rips, you will have to use a small handsaw or a jigsaw

In short, the cutter is proven to deliver satisfying and flexible performance. This super sharp cutter can last forever with proper care.

Read Also: Cement Stone Laminate Review

The Best Semi Pro Cutter – Roberts 13-inch Pro 10-64 Cutter

This is a laminate floor cutter that is designed to handle laminate as well as similar resilient floors. It has top-notch quality and performance that doesn’t disappoint most of the users.

There are plenty positive things about this device, such as:

• It can handle engineered wood, foam tiles, vinyl siding, rubber, VCT tiles, vinyl floor, and laminate floor quite effortlessly.
• The cutting range is up to 13 inches. It can support materials with 5/8 inches or 16mm of thickness.
• It comes with extendable handle in case you need to perform cuts requiring extra leverage.
• The aluminum body and base with extruded heavy gauge is designed to last forever
• The blade can be sharpened many times. Feel free if you are more comfortable replacing it.
• It comes with tough and solid plastic platform, so each plank has good support while you perform the cutting.

On the other hand, there are some possible flaws with this cutter, such as:

• It can only make cross cuts.
• The replacement blade is quite costly around $60 to $70 (depending on the sellers). Knowing how to hone your sharpening skills would be truly helpful
• If you overuse the handle extension (during cutting harder or thicker materials), it may lead to damage or stress cracking.
• The cutter isn’t exactly lightweight. With 24lbs, it can be quite a burden when you have it move it around a lot.
• The cutter isn’t suitable for floor with high hardness Janka rating more than 2000. It would be easier and simpler to use the power saw.

This cutter has 13-inch of blade that is just perfect for hardcore and loyal DIY enthusiasts.

You should be able to lend it to customers or friends if you are thinking about renting it out.

The Best Budget Laminate Floor Cutter for Tight Budgets and Small Jobs – Laminate QEP 10-35

This would be perfect for small rooms and you want to do DIY project. Moreover, if you don’t want to spend a fortune for tools, this laminate floor cutter would be the best pick.

It isn’t budget-friendly and it is truly reliable. As the previous cutters, there are some good and bad of the cutter.

The advantages include:

• It is able to accommodate laminate floor up to 8 inches in width and ½ inches of thickness (around 12mm). This is the general specs and coverage of most tile or plank flooring options. This is a perfect option for most floors
• The cutter comes with sturdy and solid tubular steel frame, and yet it doesn’t compromise the overall weigh of the unit itself. The unit weighs only 12 lbs.
• The price is quite affordable around half of the most common floor cutters with homeowner-grade
• The handle (comfort grip) has enough cushioning for comfortable use

Despite all the great benefits, this laminate floor cutter still has its own downsides. The possible downsides are:

• The cutter can only make cross cuts.
• The cutter needs a lot of force for the operation. You will have to use two hands or you have to stand up when dealing with thicker materials.
• The cutter doesn’t have any built-in platform. It does come with inverted and loose V-shaped stand which can be set separately from the main unit. It is designed for extra support. It can be complicated to position the stand properly especially when cutting the planks with 5 feet long.
• The cutting surface isn’t sharp. It isn’t for linoleum, LVT, or vinyl flooring or the same floors with similar traits. The surface isn’t exactly a cutting blade but it is more like a snapping bar, so it will tear and crush softer materials.

In the end, the cutter should be able to help you deal with small (up to medium) jobs while saving you money along the way.

Be advised, though, that the price may affect the overall performance of the cutter, especially the features.

Read Also: 7 Candidates for the Best Spin Mop

Final Verdict Laminate Floor Cutter

With these candidates of the best cutters, you should be able to perform DIY work quite effortlessly.

Of course, there are still many and more laminate floor cutter brands out there, although these three machines are reliable enough to help you with your DIY flooring projects.